Bosch PRAESENSA PRA-AD604, Руководство по настройке, Страница: 139 / 164

PRAESENSA Event messages | en 139
Bosch Security Systems B.V. Configuration manual 2020-09 | V1.20 | PRAESENSA 1.20
18.1.2 All devices events
The following events can occur on the following types of PRAESENSA devices: system
controller, amplifier and call station. All events in the
Group : Call , log the call‑ID that is
generated by the system controller.
The all devices events are divided in three groups:
–
Device call (announcement) events,
– General device events and
– General device fault events ,
and are listed in the following paragraphs.
Device call (announcement) events
Event: Call change
Group : Call
Occurrence: Logs the change in outputs/destinations of a call (announcement). Occurs
when output resources are: overruled, missing or added/removed manually.
Originator : Control input, Open Interface client or device, which caused the change of
resources.
Extra information: Name(s) of the output(s) that were removed from the call
(announcement).And/or name(s) of the output(s) that were added to the call
(announcement).
Event: Call end
Group : Call
Occurrence: Logs the end of a call (announcement).
Originator :
– In case of an overruled call, in case of lost resources or in any case the system decides
to end the call: the system controller as device is logged as originator.
– In case of an ended call by a stop command: the originator of the control input is logged
as originator.
– In any other case: Control input, Open Interface client or device, which caused the end
of the call.
Extra information: Completed phase of an ended call or abort reason and active phase of an
aborted call.
Event: Call start
Group : Call
Occurrence: Logs the start of a call.
Originator : Control input, Open interface client or device, which started the call
(announcement).
Extra information:
For an original call (announcement) the following information is displayed:
–
call definition name used for the call.
– priority of the call.
– routing scheme (non-partial, partial, stacked)
– timing scheme (immediate, time-shifted, pre-monitored)
– name(s) of the start tone/message(s) of the call
– name(s) of the message(s) of the call