Bosch PKE6..Q Series, Инструкция по эксплуатации

Страница: 4 / 12

4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2 .
The control panel
Controls
When you touch a symbol, the respective function is activated.
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
If
• appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. The display remains lit until the hotplate has cooled
sufficiently.
Setting the hob
This section informs you how to set the hotplates. The table
shows heat settings and cooking times for various meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: touch the
%
symbol. The lamp next to the main
switch and the ‹ displays light up. The hob is ready for use.
To switch off: touch the
%
symbol until the lamp next to the
main switch and the display go out. All hotplates are switched
off. The residual heat indicator remains on until the hotplates
have cooled down sufficiently.
Note:
The hob switches off automatically if all hotplates have
been switched off for more than 20 seconds.
Setting a hotplate
Use the
+
and
-
symbols to set the desired heat setting.
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat setting. This
is identified by a dot.
Set the heat setting
The hob must be switched on.
1.
Touch the
§
symbol repeatedly until the
‹
indicator for the
desired hotplate lights up brightly.
2.
Touch the + or - symbol within the next 10 seconds. The
basic setting appears.
+
symbol: heat setting 1
-
symbol: heat setting 9
3.
Changing the heat setting: touch the
+
or
-
symbol until the
desired heat setting appears.
Switching off the hotplate
Use the
§
symbol to select the hotplate. Touch the
+
or
-
symbol until
‹
appears. After about five seconds, the residual
heat indicator appears.
Notes
■
Hotplate temperature is regulated by the heat switching on
and off. The heat may also switch on and off at the highest
setting.
■
If only one hotplate is in use, you can control it without
preselecting it.
&RQWUROIRU
† KRWSODWHVHOHFWLRQ
&RQWUROIRU
PDLQVZLWFK
&RQWUROIRU
' FKLOGSURRIORFN
&RQWUROVIRU
KHDWVHWWLQJDGMXVWPHQW
'LVSOD\VIRU
KHDWVHWWLQJ ³ É
UHVLGXDOKHDW ‡
RSHUDWLQJUHDGLQHVV ¯