Bosch PKD9..N24 Series, Инструкция по эксплуатации

Страница: 4 / 16

4
Getting to know your appliance
The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2 .
The control panel
Controls
When you touch a symbol, the respective function is activated.
Notes
■
The settings will remain unchanged if you touch several
symbols at once. This allows you to wipe up spills on the
control panel.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
The hotplates
â
Hotplates with bridge heating element
Two individual hotplates can be interconnected with a bridge
heating element to create one large extended cooking zone
Under normal operation, these hotplates both work as normal
single-circuit and dual-circuit hotplates.
To activate the bridge heating element: the single-circuit
hotplate must be switched off.
1.
Switch on the dual-circuit hotplate.
2.
Touch the ð symbol. The outer filament circuit on the dual-
circuit hotplate is activated. The indicator light comes on.
3.
Touch the ð symbol again. The extended cooking zone is
activated. The indicator light comes on.
To deactivate the extended cooking zone: touch the ð symbol
again. The indicator light goes out. The extended cooking zone
is deactivated.
You can also change the heat setting using the control panels
for the two hotplates.
Residual heat indicator
The hob has a two-stage residual heat indicator for each
hotplate.
If
•
appears in the display the hob is still hot. It may be used,
for example, to keep a small meal warm or to melt cooking
chocolate. As the hotplate cools down further, the display
changes to
œ
. The display remains lit until the hotplate has
cooled sufficiently.
PLQ ORZ PHG PD[
'LVSOD\VIRU
KHDWVHWWLQJ ³ É
UHVLGXDOKHDW ‡ ¤
&RQWUROIRU
KRWSODWHVHOHFWLRQ
&RQWUROVIRU
3 DXWRPDWLF
SURJUDPPHV
Í DFWLYDWLRQ
&RQWUROVIRU
PDLQVZLWFK
FRQWUROSDQHOSDXVH
' FKLOGSURRIORFN
WLPHU
6HWWLQJVUDQJH
IRUVHWWLQJWKHKHDWVHWWLQJ
IRUVHWWLQJWKHWLPHU
&RQWUROIRU
À IU\LQJVHQVRU
'LVSOD\VIRU
IU\LQJVHWWLQJV
RIVHQVRU
IU\LQJ
V\VWHP
Hotplate Activating and deactivating
$
Single-circuit hotplate
ð
Dual-circuit hotplate
Select the hotplate and touch the
ð
activation symbol
ò
Tri-circuit hotplate
Select the hotplate, touch the
ð
activation symbol; the 2nd filament circuit is activated
Touch the ð activation symbol again; the 3rd filament circuit is activated
When the hotplate is activated: the corresponding indicator lights up.
When the hotplate is switched on: the last selected size is automatically selected again