Bosch PKD9..N24 Series, Инструкция по эксплуатации

Страница: 11 / 16

11
Changing the basic settings
The hob must be switched off.
1.
Switch on the hob.
2.
Within the next 10 seconds, touch the 0 symbol for 4
seconds.
™‚ appears on the left-hand display and ‹ on the right-hand
display.
3.
Touch the 0 symbol repeatedly until the desired symbol
appears on the left-hand display.
4.
Set the desired value on the settings range.
5.
Touch the 0 symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for ceramic. Follow
the cleaning instructions on the packaging.
Never use:
■
Undiluted washing-up liquid
■
Detergent intended for dishwashers
■
Scouring agents
■
Harsh cleaning agents such as oven spray or stain remover
■
Abrasive sponges
■
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Hob surround
To prevent damage to the hob surround, please observe the
following instructions:
■
Use only warm, soapy water.
■
Do not use harsh or abrasive agents.
■
Do not use the glass scraper.
™Š Time for selecting the hotplate
‹
Unlimited: The last selected hotplate can always be adjusted without having to select it again.
‚
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹ Reset to basic setting
‹ Switched off.
‚
Switched on.
Indicator Function
*Basic setting