Bosch PIB6..E1 Series, Инструкция по эксплуатации

Страница: 7 / 16

7
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate to show
those which are still hot. Avoid touching a hotplate that displays
this.
Even when switched off, the œ / • light will remain on as long as
the hotplate remains hot.
If the pan is removed before the hotplate is turned off the
œ / •
indicators and the selected power level will appear alternately.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Switching the hob on and off
The hob is turned on and off using the main switch.
To turn on: press the
%
symbol. The indicator above the main
switch lights up. The hob is ready for use.
To turn off: press the
%
symbol until the indicator above the
main switch disappears. All hotplates are turned off. The
residual heat indicator stays lit until the hotplates have cooled
off.
Note:
The hob switches off automatically when all the hotplates
are switched off for more than 20 seconds.
Set the hotplate
Select the required power level with the
+
and
-
symbols.
Power level 1 = minimum power.
Power level 9 = maximum power.
Each power level has an intermediate setting. This is marked
with a dot.
To select the power level:
The hob must be switched on.
1.
Press the
+
or
-
symbol of the required hotplate and its
display lights up ‹ .
2.
In the following 10 seconds, press the
+
or
-
symbol. The
default settings appear.
+
symbol = power level 9.
-
symbol = power level 4.
3.
To change the power level, press the + or - symbol until the
required power level appears.
Turning off the hotplate
Press the
+
or
-
symbol until
‹
appears. The hotplate turns off
and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
Hotplate Turning on and off
$
Single hotplate Always use cookware of a suitable size.
æ
Broiler This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
q
Resistive plate-warming zone*
Press the
Û
symbol.**
* Activating the hotplate: The corresponding indicator lights up.
** The residual heat warning light comes on.
Use only cookware suitable for induction cooking; see the "Suitable cookware" section.