Bosch NKE6 BA1 Series, Инструкция по эксплуатации, Страница: 5 / 16

Getting to know your appliance
en
5
*
Getting to know your
appliance
Getting to know y our appli ance
The instruction manual is the same for various different
hobs. You can find the hob dimensions in the overview
of models.
~
Page 2
The control panel
Notes
■
When you touch a symbol, the respective function is
activated.
■
Always keep the controls dry. Moisture reduces their
effectiveness.
■
Do not pull pans close to the displays and sensors.
The electronics could overheat.
Residual heat indicator
The hob has a two-stage residual heat indicator for
each hotplate.
If
•
appears in the display the hob is still hot. It may be
used, for example, to keep a small meal warm or to
melt cooking chocolate. As the hotplate cools down
further, the display changes to
œ
. The display remains lit
until the hotplate has cooled sufficiently.
1
Operating the appliance
Operating the appl iance
In this section, you can find out how to set the hotplates.
The table shows heat settings and cooking times for
various meals.
Switching the hob on and off
You can switch the hob on and off with the hotplate
controls.
When the hob is switched on, the heat setting display
lights up.
Setting a hotplate
Adjust the heat setting of the hotplates using the
hotplate controls.
0 = hotplate off
Heat setting 1 = lowest setting
Heat setting 9 = highest setting
There is an intermediate setting between each heat
setting. This is identified by a dot.
Note:
Hotplate temperature is regulated by the heat
switching on and off.The heat may also switch on and
off at the highest setting.
This ensures e.g.:
■
sensitive components are protected from
overheating
■
the appliance is protected from electrical overload
■
better cooking results are achieved
Displays
‚ - Š
Heat settings
• / œ
Residual heat
‘
Electronic boil start control
Control panel
D
Child safety lock