22
Home Connect Settings
You can adjust Home Connect to suit your requirements
at any time.
In the basic settings for your cooktop, navigate to the
Home Connect settings to display network and appliance
information.
Notes
▯
The
•’ƒ
setting is only displayed if the appliance is
connected to the home network.
▯
The
•’„
setting is only displayed if the appliance has
once connected to a network.
▯
The
•’†
setting is only displayed if an update is
available.
▯
The
•’‡
setting is only displayed if Customer Service
is attempting to connect to the appliance. You can end
this at any time after granting access.
▯
The
•’ˆ
and
•’‰
settings are only displayed if there
is a connection to Wi-Fi.
Deactivating Wi-Fi
If Wi-Fi has been activated, you can use the
Home Connect functions.
Note:
In networked standby mode, your appliance
requires a maximum of 2 W.
1.
Turn on the cooktop.
2.
Touch and hold the
kitchen timer
key for 4 seconds.
The product information is displayed.
3.
Touch the
kitchen timer
key repeatedly until
•’
and
„
are displayed alternately.
‚
lights up in the cooking position display.
4.
Set the
‹
value on the control panel.
This deactivates Wi-Fi; the
D
symbol will go out on the
control panel.
Disconnecting from the Network
You can disconnect your cooktop from the network at
any time.
Note:
If your cooktop is disconnected from the network,
it is not possible to operate it using Home Connect.
1.
Turn on the cooktop.
2.
Touch and hold the
kitchen timer
key for 4 seconds.
The product information is displayed.
3.
Touch the
kitchen timer
key repeatedly until
•’
and
‚
are displayed alternately.
„
lights up in the cooking position display.
4.
Set the
‹
value on the control panel.
This disconnects the appliance from your home network;
the
D
symbol will go out on the control panel.
Symbol Function
•’‚
Registration in the home network (Wi-Fi)
‹
Not connected /disconnect network.
‚
Connect automatically.
ƒ
Connect manually.
„
Connected.
•’ƒ
Connection to app
‹
Not connected.
‚
Connect.
•’„
Connect to Wi-Fi
‹
Radio module switched off.
‚
Radio module switched on.
•’…
Settings via app
‹
Switched off.
‚
Switched on.*
•’†
Software update
‚
Update available and ready for installation.
ƒ
Starting installation.
•’‡
Remote access by Customer Service
‹
Not permitted.
‚
Permitted.
•’ˆ
Wi-Fi signal strength
‹
Not connected to home network (Wi-Fi).
‚
Signal strength 1
(poor)
ƒ
Signal strength 2
(moderate)
„
Signal strength 3
(good)
•’‰
Connection to Home Connect server
‹
Not connected.
‚
Connected.
* Basic setting
VSHHG
ERRVW
NLWFKHQ
WLPHU
FRRN
WLPHU
FRXQWXS
WLPHU
DXWR
FKHI
NHHS
ZDUP
(
Содержание NIT8669SUC
Страница 1: ...Use and Care Manual Cooktop NIT8669SUC NIT8669UC ...
Страница 67: ......