Bosch MUZS24DSW, Руководство пользователя

Страница: 20 / 144

en
Cleaning and servicing
20
Tip:
For optimum results, process
thin ingredients in bunches.
1.
Prepare your food.
Cut large items of food into pieces
so they fit into the filling shaft.
2.
Insert the mains plug.
→ Fig.
11
3.
Set the rotary switch to the recom-
mended speed.
→ Fig.
12
4.
Insert the food into the filling shaft
and press down with the pusher,
applying light pressure.
→ Fig.
13
5.
Stop processing when
‒
all food has been processed.
‒
the food in the bowl almost
reaches the outlet opening of
the continuous feed shredder.
6.
Set the rotary switch to ⁠.
→ Fig.
14
Wait until the appliance stops.
7.
Unplug the mains plug.
6.2 Emptying the bowl
Tip:
You can empty the bowl during
processing without removing the con-
tinuous feed shredder.
1.
Set the rotary switch to ⁠.
Wait until the appliance stops.
2.
Unplug the mains plug.
→ Fig.
15
3.
Press the release button and raise
the swivel arm until it engages.
→ Fig.
16
4.
Remove and empty the bowl.
→ Fig.
17
6.3 Removing the continuous
feed shredder
1.
Rotate the continuous feed shred-
der anticlockwise until it releases.
→ Fig.
18
2.
Remove the continuous feed
shredder from the base unit.
→ Fig.
19
6.4 Dismantling the continu-
ous feed shredder
1.
Rotate the lid anticlockwise.
→ Fig.
20
Markings and must match
up.
2.
Remove the lid.
→ Fig.
21
3.
Take hold of the disc holder by the
shaft and take out of the housing
with the cutting disc.
→ Fig.
22
4.
Take hold of the cutting disc by
the edge and remove.
→ Fig.
23
Tip:
Clean all parts immediately after
use so that residues do not dry on.
Cleaning and servicing
7 Cleaning and servicing
Cleaning and servicing
7.1 Cleaning products
Find out here what cleaning agents
are suitable for your accessories.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
accessories.
▶
Do not use cleaning agents con-
taining alcohol or spirits.
▶
Do not use sharp, pointed or metal
objects.
▶
Do not use abrasive cloths or
cleaning agents.
7.2 Overview of cleaning
Clean the individual parts as indic-
ated in the table.
→ Fig.
24