Bosch MUZ?5FW1GB, Руководство пользователя

Страница: 11 / 36

Before using the appliance
en
11
5.1 Preparing the base unit
Note:
The food processor shown in
the pictures may differ from your
model in terms of shape and fea-
tures.
1.
Set up the base unit as described
in the main operating instructions.
2.
Press the release button and move
the swivel arm down until it en-
gages in the vertical position.
→ Fig.
3
a
The swivel arm is fixed in posi-
tion 3.
3.
Rotate the base unit to the operat-
ing position.
→ Fig.
4
5.2 Inserting the seal
▶
Insert the seal into the housing
and press in firmly.
→ Fig.
5
The recesses must match up ex-
actly.
5.3 Assembling the attach-
ments
Note:
To use the special accessory,
you need the parts of the meat min-
cer, except for the knife and perfor-
ated disc.
Assembling the meat mincer
1.
Fit the worm gear into the housing
with the agitator paddle at the
front.
→ Fig.
6
2.
Fit the knife onto the worm gear
with the square projection at the
front.
→ Fig.
7
3.
Insert the required perforated disc
into the housing.
→ Fig.
8
Observe the recess on the perfor-
ated disc.
4.
Fit the threaded ring and tighten
clockwise slightly.
→ Fig.
9
Assembling the juicer attachment
1
Follow the illustrated instructions.
→
Fig.
10
-
14
Assembling the Viennese whirl
attachment
1
Follow the illustrated instructions.
→
Fig.
15
-
18
Assembling the grater
attachment
1
Follow the illustrated instructions.
→
Fig.
19
-
22
5.4 Fitting the attachment
1.
Open the locking lever.
→ Fig.
23
2.
Hold the prepared attachment hori-
zontally and match up the ends of
the agitator paddle with the drive.
→ Fig.
24
3.
Push the attachment fully onto the
drive.
4.
Rotate the attachment anticlock-
wise as far as possible.
→ Fig.
25
5.
Close the locking lever.
→ Fig.
26
6.
Tighten the threaded ring clock-
wise.
7.
Attach the filling tray.
→ Fig.
27
8.
Place a suitable container under
the attachment.
→ Fig.
28
1
Special accessory