Bosch MSK030B NSNN Series, Руководство по планированию проекта

Страница: 144 / 178

11.2 Storage instructions
11.2.1 Storage conditions
Generally, Bosch Rexroth recommends to store all components until they are
actually installed in the machine as follows:
●
In their original package
● At a dry and dustfree location
● At room temperature
● Free from vibrations
● Protected against light or direct insolation
On delivery, protective sleeves and covers may be attached to our motors.
They must remain on the motor for transport and storage. Do not remove
these parts until shortly before assembly.
Based on EN 60721-3-1, the tables below specify classifications and limit
values which are allowed for our products while they are stored. Observe the
detailed description of the classifications to take all of the factors which are
specified in the particular classification into account.
Allowed classes of ambient conditions during storage acc. to EN 60721-3-1
Classification type Class
Classification of climatic ambient conditions 1K2
Classification of biological ambient conditions 1B1
Classification of chemically active materials 1C2
Classification of mechanically active materials 1S1
Classification of mechanical ambient conditions 1M2
Tab. 11-3: Allowed classes of ambient conditions during storage
For the sake of clarity, a few essential environmental factors of the
aforementioned classifications are presented below. Unless otherwise
specified, the values given are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed ambient factors.
Allowed classes of ambient conditions during storage acc. to EN 60721-3-1
Environmental factor Symbol Unit Value
Air temperature T
L
°C
-20 ... +60 1)
Relative air humidity φ % 5 … 95
Absolute air humidity ρw g/m³ 1 … 29
Condensation - - - - Not allowed
Ice formation/freezing - - - - Not allowed
Direct solar radiation - - - - Not allowed 1)
Occurence of salt mist - - - - Not allowed 1)
1) Differs from EN 60721-3-1
Tab. 11-4: Allowed storage conditions
Before re-storage, empty the liquid coolant from the liquid-cooled
motors to avoid frost damage.
Bosch Rexroth AG DOK-MOTOR*-MSK*EXGIIK3-PR09-EN-P 142/175
Synchronous Servomotors MSK For Potentially Explosive Areas
Transport and storage