Bosch MSK030B-0900-NN Скачать руководство пользователя страница 264

Страница: 264 / 282

13.4.3

Bearings

The nominal lifetime of the bearings is L10h = 30,000 h according to

DIN ISO 281, ed. 1990, provided the permissible radial and axial forces are

not exceeded.
The motor bearings should be replaced if
●

the nominal bearing service life has been reached,

●

running noises occur.

We recommend that bearings be replaced by the Bosch Rexroth

Service.

13.4.4

Connecting cables

Death by electrocution possible due to live

parts!

DANGER

If the slightest defect is detected in the cable sheath, the system must be

shut down immediately. Then the cable must be replaced.
Do not repair any connection lines provisionally.

●

Check connection cables for damage at regular intervals and replace

them, if necessary.

●

Check any optional energy management chains (drag chains) for de‐

fects.

●

Check the protective conductor connection for proper state and tight

seat at regular intervals and replace it, if necessary.

Bosch Rexroth AG

DOK-MOTOR*-MSK********-PR12-EN-P

262/279

Synchronous Servomotors MSK

Commissioning, operation and maintenance

Содержание MSK030B-0900-NN



























































































































































































































































































Результаты поиска

Содержание MSK030B-0900-NN

Отзывы:

Bosch MSK030B-0900-NN, Руководство по планированию проекта, Страница: 264 / 282

Результаты поиска

Содержание MSK030B-0900-NN

Отзывы: