Bosch MMB6172S, Руководство пользователя

Страница: 33 / 332

Avoiding material damage
en
33
Avoiding material damage
Avoiding material dam-
age
Avoiding material damage
Follow these instructions to prevent
material damage to your appliance,
accessories or other objects in your
kitchen.
ATTENTION!
Improper use may cause material
damage.
▶
Do not operate the appliance at
no-load.
▶
Observe the maximum processing
quantities.
▶
Never use the blender jug in the
microwave or oven.
▶
Do not use the blender jug to store
objects which do not belong to it.
Environmental protection and saving energy
Environmental protection
and saving energy
Environmental protection and saving energy
Help protect the environment by us-
ing your appliance in a way that con-
serves resources and by disposing of
reusable materials properly.
Disposing of packaging
The packaging materials are environ-
mentally compatible and can be re-
cycled.
▶
Sort the individual components by
type and dispose of them separ-
ately.
Information about current disposal
methods are available from your
specialist dealer or local authority.
Unpacking and checking
Unpacking and checking
Unpacking and checking
Find out here what you need to note
when unpacking the appliance.
Unpacking the appliance and
parts
1.
Take the appliance out of the
packaging.
2.
Take all other parts and the ac-
companying documents out of the
packaging and place them to
hand.
3.
Remove any packaging material.
4.
Remove any stickers or film.
Scope of delivery
After unpacking all parts, check for
any damage in transit and complete-
ness of the delivery.
→ Fig.
1
A
Base unit
B Blender jug with EasyClick blade in-
sert
C Lid and measuring cup
D
Pusher
E
To-Go blender jug with blade insert
1
F Lid with closable mouthpiece
1
G
Instruction manual
1
Depending on the appliance specifications
Setting up the appliance
WARNING
Risk of fire!
Intense heat may cause the appli-
ance and other parts to catch fire.
▶
Never place the appliance on or
near hot surfaces.
1.
Place the appliance on a stable,
level, clean and flat work surface.
2.
Pull the power cable out to the re-
quired length.
→
"Cable length", Page 35