Bosch MMB617 Series, Руководство пользователя, Страница: 34 / 296

en
Cleaning and servicing
34
4.
Screw the To-Go blade insert and
the To-Go blender jug in tightly.
→
Fig.
16
– The and markings must
match up.
– You can only connect the To-Go
blade insert to the main unit
when the To-Go blender jug is
screwed on fully.
5.
Turn the To-Go blender jug upside
down.
→
Fig.
17
6.
Place the To-Go blade insert on
the main unit and rotate it in a
clockwise direction until it locks
into place.
→
Fig.
17
7.
Set the rotary switch to the recom-
mended speed.
→
Fig.
18
Tip:
We recommend pausing oper-
ation several times when preparing
smaller quantities of baby food in
the To-Go blender jug.
Processing can also take place
with instantaneous switching.
→
"Using instantaneous switching",
Page 33
8.
Process the ingredients until you
achieve the required result.
9.
To end the operation, set the rotary
switch to ⁠.
→
Fig.
19
7.9 Closing the To-Go
blender jug
Requirement:
The appliance has
stopped.
1.
Turn the To-Go blender jug anti-
clockwise and remove it from the
main unit.
→
Fig.
20
2.
Turn the To-Go blender jug and un-
screw the To-Go blade insert.
→
Fig.
20
3.
Insert the seal for the lid.
→
Fig.
21
4.
Close the mouthpiece on the lid.
→
Fig.
21
5.
Screw the lid and the To-Go
blender jug in tightly.
→
Fig.
21
8 Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
8.1 Dishwasher-safe compon-
ents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
▶
Only put dishwasher-safe parts in
the dishwasher.
▶
Only use programmes that do not
heat the water above 60 °C.
▶
Do not wedge plastic parts in the
dishwasher.
This overview describes the cleaning
process for the components.
→
Fig.
22
8.2 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.