8
en
Troubleshooting
3.
Hold the jar under running water for a
minute after each use to remove the
residue.
4.
Remove the jars after each use and
wash in soapy water. Then rinse with
clean water.
5.
Dry the parts thoroughly with a clean
soft cloth.
6.
Always keep/store the jars upside down.
7.
We recommend you clean your Bosch
mixer grinder immediately after use for
easier removal of residue.
Troubleshooting
Trouble
Reason
Check
Mixer grinder does
not switch on
No power supply.
Check mains supply.
Overloading with
ingredients.
Remove some ingredients, process smaller
quantities.
Overload protection
mechanism is
activated.
Press the red reset button on the bottom of
the mixer grinder.
Other than above
mentioned.
Call Bosch service centre.
Time taken for
mixing/blending is
very long
Loose blade
or wrong blade
selection.
Check blade and choose blade as per
grinding requirements. Tighten properly with
spatula/spanner.
Overloading of
mixer.
Remove some ingredients, process smaller
quantities.
Unit overheating
External heat
source.
Check and remove if any heat source
nearby.
Uneven surface that
blocks air vents.
Place the mixer on a level surface.
Overloading with
ingredients.
Remove some of the ingredients and add in
small quantities.
The coupler and/
or some other parts
are removed during
removing the blade.
This is normal and
may happen during
changing the blade.
X
“Blade changing procedure” see
page 9
.
8.
Do not immerse the main unit in water
or any other liquid or pour liquid over it.
9.
Regularly clean the jars and gaskets
after each use for proper hygiene and
performance of the Mixer Grinder.
10.
After every use of the Mixer Grinder,
pour small amounts of hot water into
the jars to remove the leftover or sticky
substances.
