Bosch LS1-UC10U, Инструкции по установке

Страница: 11 / 19

LS1 Pendant Sphere Loudspeaker Installation | en 11
Bosch Security Systems B.V. Installation note 2018.06 | V.01 | F.01U.354.322
5 Installation
To install the pendant speaker , do the following:
1. Thread the cable into the coupler.
1
2
2. Adjust the pendant suspension cable length.
3. Place the pendant suspension cable over the ceiling support.
4. Thread the cable into the opposite side of the coupler.
5. Once the proper height adjustment has been made, put the cable tail through the
through hole of the coupler, and leave at least 10 cm (4 in) of length. The maximum audio
wire length is 3 m (10 ft).
6. Tighten the screw to secure the cable.
7. Pinch the two legs of the hanger bracket together.