background image

en

    Customer service

10

4

Customer service

Customer 

service

When calling us, please give the product number (E 

no.) and the production number (FD no.) so that we can 

provide you with the correct advice. The rating plate 

with these numbers can be found inside the appliance 

(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance 

and the telephone number of the after-sales service in 

the space below to save time should it be required.

Please be aware that a visit by an after-sales engineer 

will be charged if a problem turns out to be the result of 

operator error, even during the warranty period.
Please find the contact data of all countries in the 

enclosed customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You 

can therefore be sure that the repair is carried out by 

trained service technicians who carry original spare 

parts for your appliances.

Accessories

(not included in the scope of delivery)

Note: 

These instructions apply to several appliance 

models. It may be the case that an optional accessory 

that is listed does not apply for your appliance.

Note: 

Observe the installation instructions in the 

accessory.

--------

E no.

FD no.

After-sales service

O

GB

0344 892 8999 

Calls charged at local or mobile rate.

IE

01450 2655 

0.03 € per minute at peak. Off peak 0.0088 € 

per minute.

Accessory

Order number

Basic equipment:

Starter set for circulating-air mode
Easy-change filter for starter set

LZ45650
LZ45610

Basic equipment:

CleanAir air recirculation module
Throw-away filter for CleanAir recirculation mod-

ule

LZ46800
LZ46810

Lowering frame:

Appliance width: 60 cm

LZ46600

Lowering frame:

Appliance width: 90 cm

LZ49600

Installation set:

Upper cabinet: 90 cm

LZ49200

Handle strip 60 cm (no cut out):

Stainless steel
White
Black
Black, Design

LZ46550
LZ46520
LZ46560
LZ46850

Handle strip 90 cm

 (no control panel cut-out):

Stainless steel
White
Black
Black, Design

LZ49550
LZ49520
LZ49560
LZ49850

Handle strip 60 cm (with control panel cut-

out):

Stainless steel (for control panel variant 1)
Stainless steel (for control panel variant 2)

LZ46650
LZ46750

Handle strip 90 cm

 (with control panel cut-out):

Stainless steel (for operating unit, variant 1)
Stainless steel (for operating unit, variant 2)

LZ49650
LZ49750

Содержание LI67SA560B





















Отзывы: