Bosch KN6 DV1 Series, Руководство пользователя

Страница: 18 / 24

en
Hob-based hood control
18
16.4 Controlling the extractor hood via the
hob
You can change the behaviour of your extractor hood
in the basic settings of your hob, depending on switch-
on/off of the hob or individual cooking zones.
You can select other settings using the controls on the
hob.
Setting the fan
1.
Touch ⁠.
2. Select a fan setting on the control panel.
You can choose between the levels 1, 2 and 3.
To select an intensive setting, touch 4 or 5 on the
control panel. Alternatively, you can repeatedly
touch
until the required intensive setting is dis-
played.
Switching off the fan
▶
Select the fan setting 0 on the control panel.
Switching on automatic mode
▶
Press and hold until the display shows ⁠.
a
The fan will start automatically when steam is pro-
duced.
Switching off automatic mode
▶
Press and hold until goes out.
Automatic mode will also end if you select a differ-
ent fan setting.
Setting the hood lighting
You can switch the hood lighting on and off using the
control panel of the hob.
1.
To switch the lighting on, touch ⁠.
2.
To switch the lighting off, touch again.
16.5 Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob
or individual cooking zones are switched on or off.
Setting Selection Description
⁠ ⁠ Connection between hob and extractor hood
– Not connected/disconnect
– Start connection process
– Connected to WLAN home network (Wi-Fi)
– Connected to extractor hood
-
⁠ ⁠ Automatic fan start-up
– Switched off. The extractor hood must be
switched on manually, if required.
– Switched on in automatic mode
1
. In automatic
mode, the extractor hood switches itself on when
one of the cooking zones is switched on.
– Switched on in manual mode. The extractor
hood is switched on at a specified setting when a
cooking zone is switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
⁠ ⁠ Fan run-on
– Fan switches off when the hob is switched off.
– Switched on in automatic mode
1
– Switched on with standard fan run-on
– No change to the settings
Setting for whether and how the fan is to run on
after switching off the hob.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
⁠ ⁠ Switch light on automatically
– Switched off
– Switched on
1
The light switches itself on when the hob is
switched on.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
⁠ ⁠ Switch light off automatically
– Switched off
1
– The light switches itself off when the hob is
switched off.
The display shows this setting only when the appli-
ance has been connected to the extractor hood.
1
Factory setting (may vary according to model)