Bosch KDN series, Инструкция по эксплуатации

Страница: 28 / 95

en
28
Switching
the appliance on
Fig.
!
Switch on the appliance with the On/Off
button 1.
The temperature display 3 flashes until
the appliance has reached the set
temperature.
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
■
Refrigerator compartment: +4 °C
■
Freezer compartment: –18 °C
Operating tips
■
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■
The fully automatic NoFrost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
Setting
the temperature
Setting the temperature
Turn temperature controller, Fig.
!
/5, to
the required setting.
When the controller is at a medium
setting, the temperature drops
to approx. +4 °C in the coldest zone.
Fig.
!
/5
Higher settings lower the temperature in
the refrigerator compartment.
We recommend:
■
Perishable food should not be stored
above +4 °C.
■
Low setting for short-term
storage of food (energy-saving mode).
■
Medium setting for long-term storage
of food.
■
Select a higher setting only
temporarily, when the door is
frequently opened or large quantities
are placed in the refrigerator
compartment.
Freezer
The temperature can be set from -16 °C
to -24 °C.
Keep pressing temperature setting
button 2 until the required freezer
compartment temperature is set.
The value last selected is saved. The set
temperature is indicated on temperature
display 3.
We recommend a factory setting of -18
°C in the freezer compartment.