Bosch IndraControl PR21, Руководство по эксплуатации

Страница: 11 / 36

4 Intended use
The embedded automation computers by Rexroth are intended for "IoT Gateway"
applications.
Risk of destruction if accessory parts, mounting
parts, components, cables, wires, software and
firmware not expressly specified are used.
NOTICE
The embedded automation computers may only be used as intended and with
the accessories, mounting parts and other components specified in this docu-
mentation. Components that are not expressly mentioned must neither be at-
tached nor connected. The same applies to cables and lines.
Only to be operated with the component configurations and combinations ex-
pressly defined and with the software and firmware specified in the correspond-
ing functional description.
Typical areas of application of the embedded automation computers:
●
Handling and assembly systems
●
Packaging and food processing machines
●
Printing and paper converting machines
●
Machine tools
●
Wood processing machines
The devices may only be operated under the mounting and installation condi-
tions, the position and the ambient conditions (temperature, degree of protec-
tion, humidity, EMC etc.) specified in the related documentation.
5 Spare parts, accessories and wear parts
5.1 External 24 V power supply unit
Ordering code Part number Description
VAP01.1H-W23-024-010-NN R911171065 External 24 V power supply unit
for the IndraControl V devices
Tab. 5-1: External 24 V power supply unit for the operator display
5.2 Wear parts
Wear parts are not subject to any warranty.
5.2.1 CMOS battery
The service life of the CMOS battery is 5 to 7 years.
IndraControl PR21 Embedded Automa-
tion Computer
5/29
Spare parts, accessories and wear parts
R911389662_Edition 02 Bosch Rexroth AG