background image

4

 |

 

Technical Instructions

IDS BOVA E-Box Replacement - BTC 761702110 B (09.2022)

1     Key to Symbols and Safety Instructions

1.1     Key to Symbols

Warnings

      Warnings in this document are identifi ed by a 

warning triangle printed against a grey background.
Keywords at the start of a warning indicate the type and seriousness  
of the ensuing risk if measures to prevent the risk are not taken.

The following keywords are defi ned and can be used in this document:

 

DANGER

 indicates a hazardous situation which, if not avoided, will result 

in death or serious injury.

 

WARNING

 indicates a hazardous situation which, if not avoided, could 

result in death or serious injury.

 

CAUTION

 

indicates a hazardous situation which, if not avoided, could 

result in minor to moderate injury.

 

NOTICE

 is used to address practices not related to personal injury.

Important information

 

   This symbol indicates important information where

there is no risk to people or property.

 

2     Outdoor Unit Model Numbers

Bosch Part 

Number

Bosch Model Number

Description

7739832068

BOVA-36HDN1-M18M

36kBTU, Inverter Condensing Unit

Table 1

      

ODU Model & Part Numbers

3     Components

The following components are included in the kit:

Figure 1

1

3

4

5

6

2

     Components

 

   Updated wiring diagram included in kit. Replace the old wiring diagram 

on the back of the access panel.

Item

Description

Qty

1

3T Control Board + E-box

1

2

Replacement Manual

1

3

3T Bottom Access Panel

1

4

Screws

8

5

Zip Ties

8

6

Wiring Diagram

1

Table 2

     

3T E-Box Kit Components

Содержание IDS BOVA 1.0













Отзывы: