en
Operating the appliance
20
Operating the oven
Switching on the oven gas burner
1.
Open the top cover of the appliance.
2.
Open the oven door.
3.
Press and hold the selector for the oven to the
ignition position
8
.
The gas burner ignites.
4.
Press and hold the selector for a few seconds until
the flame stabilises.
5.
Turn the selector for the oven to the required
temperature.
6.
Close the oven door carefully.
Do not press the ignitor for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the oven gas burner
Turn the selector to the
Û
position.
Operating the grill
Note:
Keep the appliance door closed while you are
using the grill function.
1.
Open the top cover of the appliance.
2.
Open the oven door.
3.
Press and hold the selector for the grill and turn it to
the "
—
" position.
The gas burner ignites.
4.
Press and hold the selector for a few seconds until
the flame stabilises.
5.
Turn the selector for the grill to the required grill
setting.
Note:
The flame is not stable between positions
Û
and
—
. Always select a position between "
—
" and "
˜
".
6.
Close the oven door carefully.
Do not press the ignitor for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
In the event of the burner flames being accidentally
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one minute.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the grill
Turn the control knob to the
Û
position.
Using combination mode
Note:
The temperature range marked on the selector
for the oven applies only when using conventional
heating. In combination mode, the temperature in the
oven is higher than the temperature that has been set.
Switching on combination mode
1.
Open the top cover of the appliance.
2.
Open the oven door.
3.
Press and hold the selector for the oven to the
ignition position
8
.
The oven gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises
4.
Turn the selector for the oven to the required
temperature.
5.
Press and hold the selector for the grill and turn it to
the "
—
" position.
The grill gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
6.
Close the oven door carefully.
7.
Set the required temperature using the selectors for
the grill and oven.
Caution!
If the grill and oven gas burners are operating at the
same time (combination mode); when cooking with
water, the grill gas burner may go out due to the air
circulation.
Notes
■
If the gas burner does not ignite within 15 seconds,
stop attempting to ignite the flame, open the oven
door and wait for 60 seconds.
■
If the flame inadvertently goes out, turn the selector
to the "
Û
" position and wait for 60 seconds.
Switching off combination mode
Turn the selector for the grill and oven to
Û
.
Position
Meaning
˜
Small flame, lowest setting
—
Large flame, highest setting
Содержание HGW3ASQ50M
Страница 2: ......