Bosch HGV725123N, Инструкция по эксплуатации

Страница: 13 / 52

13
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.
Types of heating and temperature
Example in the picture: 190 °C, Top/bottom heating
%
.
1.
Use the function selector to select the required type of
heating.
2.
Use the temperature selector to set the temperature or the
grill setting.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
1.
Set the function selector to
I
.
2.
Use the temperature selector to set the temperature.
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
■
Slight differences in the colours on the front of the oven are
caused by the use of different materials, such as glass,
plastic and metal.
■
Shadows on the door panel which look like streaks, are
caused by reflections made by the oven light.
■
Enamel is baked on at very high temperatures. This can
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Upper glass cover
Before opening the top cover, remove any spills with a cloth.
Use glass cleaner if possible.
For cleaning, remove the top cover. To do this, hold the cover
securely on both sides with both hands and pull it upwards.
If the cover hinges become loose, note the letters marked on
them. The hinge with the letter R must be fitted on the right, and
the hinge with the letter L must be fitted on the left.
After cleaning, re-assemble the top cover following the same
procedure in reverse order.
Only close the top cover once the burners have cooled down.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
■
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
remover,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
When cleaning the oven do not use
■
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
Wash new sponges thoroughly before first use.