English 18
Setting a silent control panel
When choosing a function, a beep will be heard each time
a pad is pressed. If desired, the control can be
programmed for silent operation. Press and hold “
START
TIME
”. After 7 seconds, the control will beep once. This will
block the controls from sounding when a pad is pressed.
To return the sound, press and hold “
START TIME
” again
for 7 seconds until the control beeps once.
Setting oven lockout
The control can be programmed to lock the oven door and
lockout the oven control pads.
To set the oven lockout feature:
(for models with Convection)
1. Press “
Clear/Off
” and “
Convection
” together and hold
for 3 seconds. “
Loc
” will appear in display, the “
Door
Locked
” indicator light will flash and the motor driven
door lock will begin to close automatically.
Allow about
15 seconds
for the oven door to lock. Once the oven
door is locked, the current time of day will appear in the
display.
2. To cancel the oven lockout feature, press “
Clear/Off
”
and “
Convection
” hold for 3 seconds. The control will
unlock the oven door and resume normal operation.
To set the oven lockout feature:
(for models without Convection feature)
1. Press
“Lock”
and hold for 3 seconds. “
Loc
” will appear
in display, the “
Door Locked
” indicator light will flash and
the motor driven door lock will begin to close automatically.
Allow about 15 seconds
for the oven door to lock. Once
the oven door is locked, the current time of day will appear
in the display.
2. To cancel the Oven Lockout feature, press
“Lock”
and
hold for 3 seconds. The control will unlock the oven door
and resume normal operation.
Note:
DO NOT open the oven door
while the indicator light
is flashing. Allow about 15 seconds for the oven door to
lock. Once the oven door is locked, the current time of
day will appear in the display.
If any control pad is pressed with the oven lockout
feature active, “
Loc
” will appear in the display until the
control pad is released.
Setting the minute timer
1.
Press
“TIMER On/Off”
.
2.
Press the “
+
” to increase the time in one minute
increments. Press and hold the “
+
” to increase the time
in 10 minute increments. The timer can be set for any
amount of time from 1 minute to 11 hours and 59
minutes.
Note:
If the “
-
” pad is pressed first, the timer will
advance to 11 hours and 59 minutes.
3.
When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until
“TIMER On/Off”
is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press
and hold the “
+
”
or
“
-
” to increase or decrease the time
remaining.
To cancel the minute timer before the set time has run out
press
“TIMER On/Off”
once .
Note:
The indicator light located above the
“TIMER On/Off”
pad will glow while the minute timer is active.
The minute timer will display hours and minutes until 1
hour remains on the timer. Once less than 1 hour
remains, the display will count down in minutes and
seconds. Once the timer has less than 1 minute
remaining only seconds will display.
The minute timer DOES NOT start or stop the cooking
process. It serves as an extra timer in the kitchen that
will beep when the set time has run out. The minute
timer can be used alone or while using any of the other
oven features. When the minute timer is in use with any
other feature, the minute timer will be shown in the
display. To view other functions, press the pad for that
function.
