Getting to know your appliance
en
13
Control panel
Here you can see an overview of the control panel. The
design depends on the respective appliance model.
Function selector
Turn the function selector anti-clockwise to set the oven
temperature or clockwise to select the grill.
Heat setting for the lower burner: 3 kW
Heat setting of the gas grill: 2,1 kW
Timer
Using the timer, you can set a time of up to 60 minutes.
The timer runs independently of the oven. It can be
used like a kitchen timer.
Setting procedure
Set the timer for the desired cooking time.
The time has elapsed
When the time has elapsed, a signal sounds. The
switch turns to the OFF position • automatically.
Light button
This button switches on the oven light.
To switch it off, press the multi-function button again.
Ignition button
This button activates the electronic ignition system.
When you press the button, all igniters ignite at the
same time.
Burner knob
You can adjust the heat setting of the hotplates using
the four burner knobs.
There is a limit stop at the end of the settings area. Do
not turn the timer beyond this.
The cooking compartment
The oven light is located in the cooking compartment.
Steam outlet
The hot air from the cooking compartment escapes at
the rear of the hob. Caution: do not cover the ventilation
slots. Otherwise the oven will overheat.
Explanatory notes
1
Selector for the oven gas burners (function selector)
2
Timer
3
Lamp button
4
Ignition button
5
Hotplate controls
Positions
Function
ÿ
Zero position
Oven not hot.
170-270
Temperature
range
Temperature range in ºC for bak-
ing cakes in baking tins, pizza on
the baking sheet, biscuits etc.
(
Grill setting
Grill burner setting for grilling at
maximum temperature.
Setting
Function
û
Zero position
Setting off
S
End of the set cooking
time
Signal when the set time has
elapsed
S
- 60
Minute display
Time display, in minutes.
The Positions
Function/gas oven
þ
Zero position
The oven is switched off.
—
˜
Settings area
Large flame = highest setting
Economy flame = lowest setting
