Bosch HBG5575.0A, Руководство пользователя и инструкции по установке

Страница: 21 / 36

Shelf supports
en
21
1.
First, push the rail into the middle of the rear
socket until the rail rests against the cooking
compartment wall, and then push this back ⁠.
2.
Push the rail into the front socket until the rail
also rests against the cooking compartment wall,
and then press this downwards ⁠.
3
4
17.3 Removing the pull-out rail
WARNING ‒ Risk of burns!
The shelf supports get very hot
▶
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
ATTENTION!
The self-cleaning surfaces in the cooking compartment
may be damaged by detaching and attaching the pull-
out rails.
▶
Detach the rails before detaching or attaching the
pull-out rails.
Note:
If necessary, you can use pull-out rails on all
levels.
1.
Push on the tab marked
PUSH
behind the rail, and
push the rail to the rear.
2.
Keep the
PUSH
tab pushed back and swing the
rail outwards ⁠.
3.
Pull the rail out towards the front until the retainer at
the back unhooks.
4.
Remove the pull-out rail.
5.
Clean the pull-out rail.
→
"Cleaning products", Page 17
17.4 Attaching the pull-out rail
Note:
The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.