16
Changing the basic settings
Prerequisite: The oven must be switched off.
Example in the picture: changing the audible signal duration
basic setting from medium to short.
1.
Press and hold the
°
button for approximately 4 seconds until
the heading "Basic setting" and the first basic setting "Select
language" appears.
2.
Turn the rotary selector to select the required basic setting.
3.
Press the
X
button to move to the next line.
4.
Change the basic setting by turning the rotary selector.
5.
You can now make further changes to the basic settings by
pressing the
Y
button to change line and then making the
changes as described in points 2 to 4.
6.
Press and hold the
°
button until the clock appears. This
takes about four seconds. All changes are saved.
Cancelling
Press the
%
button. The changes are not applied.
Automatic switch-off
Your oven has an automatic switch-off function. It is activated if
no cooking time is set and the settings have not been changed
for a long time. The point at which this occurs depends on the
temperature or grill setting that has been set.
Switch-off activated
“Automatic switch-off" appears in the display. Operation is
interrupted. Press any button to clear the text. You can make
new settings.
Note:
If a cooking time is set, the oven stops heating once the
cooking time has elapsed. The automatic switch-off function is
not necessary.
Self-cleaning
During self-cleaning, the cooking compartment is heated to
approx. 480 °C. Any food residues from roasting, grilling and
baking are burnt to ash. Self-cleaning takes approx. 2 hours,
including the heating up and cooling down times.
Notes
■
For safety reasons, the oven door locks automatically. You
cannot open the oven door again until the cooking
compartment has cooled slightly and the padlock symbol for
the locking mechanism disappears. Do not attempt to push in
the latch by hand.
■
If you open the appliance door again after the appliance has
started, the locking latch may be visible at the top of the
oven. This is normal. The latch disappears automatically
when you close the door. Please do not attempt to push in
the latch by hand.
■
Do not attempt to open the appliance door while self-cleaning
is in operation. The cleaning process may be cancelled.
■
The cooking compartment light remains off during self-
cleaning. The temperature control bars do not appear.
ã=
Risk of fire!
■
The outside of the appliance becomes very hot. Make sure
that nothing is placed against the front of the appliance.
MicroCombi, gentle
Suggestion: 180 °C
from 30 to max. 250 °C
Permanently change default temperature for
the type of heating.
MicroCombi, intensive
Suggestion: 200 °C
from 30 to max. 250 °C
Permanently change default temperature for
the type of heating.
Sabbath mode:
no
no
yes
See the Sabbath mode section
Operating voltage
220-230V
220-230V
230-240V
Adjusting the operating voltage
Restore factory settings:
no
no
yes
Reverse all changes and restore basic
settings.
Basic setting
Options
Explanation
6HOHFWODQJXDJH
(QJOLVK
%DVLFVHWWLQJ
6DYHVHF
PHGLXP
%DVLFVHWWLQJ
6DYHVHF
6LJQDOGXUDWLRQ
%DVLFVHWWLQJ
6DYHVHF
VKRUW
6LJQDOGXUDWLRQ
Содержание HBC86P7 3 Series
Страница 1: ...HBC86P7 3 9000615355 9000615355 en Instruction manual 2 ...
Страница 39: ......
Страница 40: ...910112 1 Robert Bosch Hausgeräte GmbH Carl Wery Straße 34 81739 München DEUTSCHLAND ...