Bosch HBC86P7 3 Series, Инструкция по эксплуатации

Страница: 12 / 40

12
Cancelling operation
Press and hold the n button until “Select function” appears.
You can now change the settings.
Setting a later end time
See the section entitled Time-setting options , Setting a later end
time.
Series of operations
You can use the SeriesOperations function to set up to three
operating modes and then start.
Requirement: you must set a cooking time for each step.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
Set a cooking time for each step in the series of operations.
1.
Press the
2
button.
The button lights up. “SeriesOperations” appears in the
display as the heading. The 1 for the first step in the series of
operations is in brackets.
2.
Select and set the desired operating mode.
3.
Press the Y button to return to [1] and use the rotary
selector to select [2] for the second step in the series of
operations.
4.
Select and set the desired operating mode.
5.
Press the
Y
button to return to [2] and use the rotary
selector to select [3] for the third step in the series of
operations.
6.
Select and set the desired operating mode.
7.
Press the
n
button.
Appliance operation begins.
Note:
The first step in the series of operations appears in the
display. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0
button.
Changing the setting
Changes can only be made before operation begins.
1.
Press the
Y
button to move upwards until 1, 2 or 3 appears
in the brackets.
2.
Use the rotary selector to select the step that you wish to
change.
3.
Change the setting.
Cancelling operation
Press and hold the
n
button until “Select function” appears.
You can now change the settings.
Time-setting options
You can call up the time-setting options menu by pressing
the 0 button. The following functions are available:
If the oven is switched off:
■
Setting the timer
■
Setting the clock
If the oven is switched on:
■
Setting the timer
■
Setting the cooking time
■
Setting a later end time
Setting the time-setting options ­ in brief
1.
Press the
0
button to open the menu.
2.
Set the desired function by turning the rotary selector.
3.
Press the
X
button to change line and turn the rotary
selector to set the time or cooking time.
4.
Press the
0
button to close the menu.
A detailed description of how to adjust each individual function
is provided below.
Setting the timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.
Press the 0 button.
The time-setting options menu appears.
2.
Press the
X
button and set the timer run time using the
rotary selector.
3.
Press the
0
button to close the time-setting options menu.
The display returns to its previous state. The U symbol for the
timer appears, and the time can be seen counting down.
When the time has elapsed
A signal sounds. The time has elapsed. The display shows
U
00:00. You can cancel the signal earlier by pressing the
0
button.
Cancelling the timer time
Press the 0 button to open the time-setting options menu.
Press the
X
button and use the rotary selector to turn the time
back to 00:00. Press the 0 button to close the menu.
Changing the timer time
Press the
0
button to open the time-setting options menu.
Press the
X
button and in the next few seconds change the
timer time by turning the rotary selector. Press the
0
button to
close the menu.