Bosch Greentherm 9800 SE 160/199, Руководство пользователя

Страница: 41 / 64

6 720 816 815 (2016/10) Greentherm 9800 SE 160/199 | SEC 199
Operating Instructions | 41
▶ Touch the symbol until the display shows P9 Purge .
After 2 sec. the fan starts working to purge the exhaust
circuit.
6.5.3 SA - Settings
Only to be use when domestic recirculation is installed.
Fig. 39 SA - Settings
This menu provide access to several parameters.
▶ Access to information / adjustments menu.
Display shows P4 Information .
▶ Touch the symbol until the display shows SA
Settings .
▶ Touch the symbol .
Display shows A0 Clock/Date .
▶ Use the symbols or to scroll through the
information/adjustments menus.
–
A0 Clock/Date
– A1 Recirculation
– A2 Vacations
– A3 Language Set
– A4 Demonstration
– A5 Reset Appliance
– A6 Display Position
– A7 Wireless Connectivity
– A8 Startup Delay
– A9 Units Set
– AA Display Timeout
– AB Region Selection
▶ Touch the symbol to select the desired information.
A0 Clock/Date
Set the time :
▶ Touch the symbol .
Display shows Clock and Date menu.
▶ Touch the symbol to set the Clock.
▶ Use the symbols or to set the hours.
▶ Touch the symbol when hour is correct.
▶ Use the symbols or to set the minutes.
▶ Touch the symbol when minutes are correct.
▶ Use the symbols or to choose a.m. or p.m.
▶ Touch the symbol to exit the Clock menu.
Set the Date :
▶ Use the symbols or to choose the Date menu.
Display shows Date menu: MM / DD / YYYY.
▶ Touch the symbol .
▶ Use the symbols or to set the month.
▶ Touch the symbol when month is correct.
▶ Use the symbols or to set the day.
▶ Touch the symbol when the day is correct.
▶ Use the symbols or to set the year.
▶ Touch the symbol when the year is correct.
▶ Touch the symbol to exit the Date menu.
Clock and Date are defined.
▶ Touch the symbol , the Hours and Clock blink 3 times
and exit menu.
A1 Recirculation
Recirculation program is to control when a domestic
recirculation system is active.
Set recirculation program:
▶ Touch the symbol .
Display shows following menu.
–
HR House Recirculation
– TL Tank Loading
– OFF Off
HR House Recirculation
Set the Schedule :
▶ Touch the symbol , to select Schedule .
▶ Touch the symbol , to enter the programming menu.
Display shows week days.
▶ Touch the symbol , to select a week day.
▶ Use the symbols or to choose option Add New .
▶ Touch the symbol , to enter the recirculation program.
▶ Use the symbols or to choose the beginning
hour.
▶ Touch the symbol , to set the beginning hour.
▶ Use the symbols to choose the end hour.
▶ Touch the symbol , to set the ending hour.
A recirculation period is defined.
The user can add additional recirculation periods on the
same day.
▶ Touch the symbol , to select Add New and repeat all
steps mentioned above.
The fan remains running until the Purge menu
is exited, to do so:
▶ Touch the symbol
.