Gas Conversion Kit
1
6720813634 (2019/02) US
1
Gas Conversion
DANGER:
Personal injury and property damage
▶ This conversion shall only be performed by a trained and
certified installer in accordance with the manufacturer‘s
instructions and all applicable codes and requirements of
the authority having jurisdiction.
▶ If the information in these instructions is not followed
exactly, or the installation, adjustment, modification,
operation or maintenance is carried out by an unqualified
person, a fire, explosion or generation of large amounts of
carbon monoxide may result causing property damage,
personal injury or loss of life.
▶ Always disconnect the appliance from the mains power
before performing any work. Always disconnect the
appliance from the mains power before performing any
work. Take measures to prevent accidental reconnection.
▶ The installer is responsible for the proper conversion of this
appliance.
▶ The conversion is not complete until the operation of the
converted appliance is checked as specified in these
instructions.
DANGER:
Explosion!
▶ Close the gas cock prior to working on the gas train.
▶ Check for gas leaks after carrying out work on the gas train.
Installation, power connection, connection on the gas and flue
gas side and commissioning must only be carried out by a
contractor certified for such work by the state or local
jurisdiction or the local gas or power utility.
2
Installation instructions
▶ Follow installation manual for more details, section 6
Operation Instructions.
▶ Assemble the LP conversion kit.
Fig. 1
LP conversion kit
▶ Disconnect the power supply cord and shut off the gas
supply.
Fig. 2
▶ Remove NG plate.
Fig. 3
NG plate
▶ Install the LP conversion plate, as shown in fig. 4 and fig. 5,
for the 160kBtu and 199kBtu appliance, respectively.
Fig. 4
160kBTU appliance gas conversion kit
