English |
15
Bosch Power Tools
1 609 92A 37F | (23.8.16)
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting grooves for biscuit dowel
joints in chipboard, hard- and softwood, plywood, fibreboard
or artificial marble (e.g. Corian®).
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Handle (insulated gripping surface)
2
On/Off switch
3
Clamping lever of the angle stop
4
Height scale
5
Angle scale
6
Centre mark of cut, horizontal
7
Slip safety
8
Knob of the adjustable height stop
9
Adjustable height stop
10
Marks of cutting disc width
11
Centre mark of cut, vertical
12
Clamping lever of adjustable height stop
13
Direction-of-rotation arrow on housing
14
Spindle lock button
15
Auxiliary handle (insulated gripping surface)
16
Attachment plate
17
Angle stop
18
Cutting depth adjustment knob
19
Lock nut for cutting depth adjustment
20
Knurled screw for cutting depth adjustment
21
Vacuum connection
22
Dust bag
23
Two-pin spanner
24
Clamping nut
25
Cutting disc
26
Direction-of-rotation arrow on the cutting disc
27
Centring collar on mounting flange
28
Mounting flange
29
Cutter spindle
30
Spindle direction-of-rotation arrow
31
Base plate lock washer
32
Base plate clamping screw
33
Base plate
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-19.
Typically the A-weighted noise levels of the product are:
Sound pressure level 87 dB(A); Sound power level 98 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
<2.5 m/s
2
, K=1.5 m/s
2
.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Biscuit Jointer
GFF 22 A
Article number
0 601 620 0..
Rated power input
W
670
Output power
W
400
No-load speed
min
-1
9000
Cutting depth, max.
mm
22
Spindle thread diameter
M10 x 1.25
Diameter of cutting disc mount-
ing bore
mm
22
Cutting disc diameter, max.
mm
105
Cutting disc thickness, max.
mm
4
Weight according to EPTA-
Procedure 01:2014
kg
2.9
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
OBJ_BUCH-268-005.book Page 15 Tuesday, August 23, 2016 8:57 AM
