44
en | Configuration
FLEXIDOME panoramic 5100i | FLEXIDOME
panoramic 5100i IR
2022-01 | V01 | F.01U.385.628
User manual
Bosch Security Systems B.V.
Network MTU [Byte]
Specify a maximum value in bytes for the package size (including IP header) to optimize data
transmission.
Click
Set
to apply the changes.
4.7.3
Advanced
RTSP
RTSP port
If necessary, select a different port for the exchange of the
RTSP
data from the list. The
standard
RTSP port
is 554. Select
Off
to deactivate the
RTSP
function.
TCP metadata input
TCP port
The device can receive data from an external TCP sender, for example an ATM or POS device,
and store it as metadata. Select the port for TCP communication. Select
Off
to deactivate the
function.
Sender IP address
Enter a valid
Sender IP address
.
Syslog
Server IP address
Enter the appropriate IP address of the server.
Server port (0 = Off)
Enter the number of the server port.
Protocol
Select the appropriate protocol:
UDP
,
TCP
, or
TLS
.
Click
Set
to apply the changes.
4.7.4
Network Management
SNMP
The camera supports two versions of Simple Network Management Protocol (SNMP) for
managing and monitoring network components, and can send SNMP messages (traps) to IP
addresses. The unit supports SNMP MIB II in the unified code.
Select either of the options that follow for the
SNMP
parameter:
–
SNMP v1 legacy
–
SNMP v3
If you select either of the SNMP version, but do not enter an SNMP host address, the camera
does not send messages (traps) automatically, but only replies to SNMP requests.
Select
Off
to deactivate the SNMP function.
1. SNMP host address / 2. SNMP host address
If you wish to send SNMP traps automatically, enter the IP addresses of one or two required
target units here.
SNMP v3
When you select
SNMP v3
in the field
SNMP
, the tabs
User
and
Trap user
show.
The same fields show in both tabs.
User name
Enter the appropriate user name.
Authentication protocol
Select the appropriate authentication protocol: None, MD5, or SHA1.
