Bosch FLEXIDOME multi 7000i, Руководство по установке

Страница: 11 / 44

FLEXIDOME multi 7000i Planning information | en 11
Bosch Security Systems B.V.
Installation manual
2021-03 | 01 |
Quantity Component
1 Safety information
3 Installer UX labels
4.3 Preparation
Before installation, prepare and plan the installation process and materials needed.
Pre-requisites
– Remove the components from the box. Make sure that all parts are included and are not
damaged.
– The necessary material and equipment:
–
4 screws M4 or M5 and mounting plugs M4 or M5 are necessary. For installation with
conduit, 5 screws M4 or M5 and mounting plugs M4 or M5 are necessary.
– Appropriate size power drill.
– Screwdriver and bit holder for TR20 bit, or use the provided TR20 Allen key.
– Standard micro SD card (optional)
Note : Bosch recommends the use of industrial micro SD cards with health
monitoring.
– Wireless USB dongle for wireless commissioning (optional) - available mid of 2021.
4.4 Network and PoE+
i
Notice!
Use only PoE+ IEEE 802.3at Type 2, Class 4 approved devices.
Power-over-Ethernet Plus (PoE+) can be connected at the same time as a 24V AC power
supply. If auxiliary power (24V AC) and PoE+ is applied simultaneously, the camera draws its
power from PoE+ by default, and seamlessly switches to auxiliary input if PoE+ fails.
When PoE+ returns, the camera seamlessly switches back to PoE+ as its default power source.
Cables
For cable requirements, refer to Wiring the camera base, page 20.