Bosch FLEXIDOME multi 7000i Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 44

Bosch FLEXIDOME multi 7000i Скачать руководство пользователя страница 14

14

en | Installation

FLEXIDOME multi 7000i

2021-03 | 01 |

Installation manual

Bosch Security Systems B.V.

6.

Attach the conduit plate with the conduit plate adapter to the surface with a 5-6 mm
(0.2 in.) screw.

7.

Remove the mounting plate from the box.

8.

Mark the positions of the holes on the surface. The mounting plate has only one side
available for the conduit. Make sure to position it accordingly.
For standard installation, use the mounting holes marked with a B on the mounting plate.
For a different installation, for example for an installation on an electrical box, use
different mounting holes. For more information, refer to

Installing the mounting plate,

9.

Drill the 4 holes with the appropriate diameter drill to support your 5-6 mm (0.2 in.)
screws and plugs.

10. Install 4 plugs in the holes.
11. Attach the mounting plate to the surface with 4 screws. Tighten the screws between 4

and 7 Nm (3 and 5.2 lbfft).

12. Install the conduit cover on the conduit plate with the bolt. Tighten the screw between

1.4 and 2 Nm (1 lbfft and 1.5 lbfft) with the TR20 Allen key.

«
...
12
13
14
15
16
...
»

Содержание FLEXIDOME multi 7000i













































Отзывы:

Нет отзывов