30
en | Configuration
FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
11-2022 | V02 | F.01U.394.427
User manual
Bosch Security Systems B.V.
4.4.9
Scene mode scheduler
The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
Select the mode you wish to use during the day from
Marked range
drop-down box.
2.
Select the mode you wish to use during the night from
Unmarked range
drop-down box.
3.
Use the two slider buttons to set the
Time ranges
.
To set the
Marked range
as the single mode of the device, select the complete time range.
The text “Always” will appear after the
Marked range
menu.
Click
Set
to apply the changes.
4.4.10
Encoder Streams
When this menu is accessed while the device is recording, the following message appears at
the top of the page: “Recording is currently active. At ‘Active profile’ the stream profile used
for recording is displayed, and overrules the ‘Non-recording profile’.”
Stream prioritization
Select the stream that should not drop any frame.
Coding standard
Select the coding standard you want to use for the stream.
Active profile
Active profile
shows the profile that is in use and can be set differently per stream
If no edge recording or VRM recording is active, the device switches to the
Non-recording
profile
. Please refer to section
Non-recording profile
.
Select one of the following profiles for each stream:
Profile number
Description
Profile 1
For a high resolution image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
Profile 2
For a high resolution image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
Profile 3
For a high resolution image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
Profile 4
For a low resolution image, the video bit rate and frame quality are
adjusted to ensure that the picture quality is the priority.
Profile 5
For a low resolution image, the video bit rate and frame quality are
adjusted to a median profile for everyday use.
Profile 6
For a low resolution image, the video bit rate and frame quality are
adjusted to ensure that the bit rate is the priority.
Profile 7
Ideal for encoding on a DSL uplink where bit rate limitations are critical.
Profile 8
Ideal for encoding on a 3G uplink where bit rate limitations are critical.
Stream 1 always runs at maximum selected resolution in stream limits. On stream 2 and 3, you
can select various downscaled resolutions.
Non-recording profile
Select one of the resolutions from the drop-down menu for each stream.
