FLEXIDOME indoor 5100i (IR) | FLEXIDOME
outdoor 5100i (IR)
Configuration | en
19
Bosch Security Systems B.V.
User manual
11-2022 | V02 | F.01U.394.427
4.3.3
DynDNS
A dynamic Domain Name Service (DNS) allows you to select the unit via the Internet using a
host name, without having to know the current IP address of the unit. You can enable this
service here. To do this, you must have an account with one of the dynamic DNS providers and
you must register the required host name for the unit on that site.
Note:
For information about the service, registration process and available host names refer to the
provider.
Enable DynDNS
Use the drop-down menu to select
On
or
Off
to enable or disable
DynDNS
.
Provider
Select your dynamic DNS Provider from the drop-down list.
Host name
Enter the host name registered for the unit.
User name
Enter the user name you registered.
Password
Enter the password you registered.
Force registration now
Force the registration by transferring the IP address to the DynDNS server. Entries that change
frequently are not provided in the Domain Name System. It is a good idea to force the
registration when setting up the device for the first time. Only use this function when
necessary and no more than once a day, to avoid the possibility of being blocked by the
service provider. To transfer the IP address of the device, click the
Register
button.
Status
The status of the DynDNS function is displayed here for information purposes; these settings
cannot be changed.
Click
Set
to apply the changes.
4.4
Camera
4.4.1
Installer Menu
Sensor mode
Different sensor mode options are available depending on the device's specifications.
The various options are described in further detail below.
Four
Sensor mode
options are available to configure based on the local mains power
frequency and scene requirements:
25 fps - HDR
30 fps - HDR
50 fps
60 fps
Some types of light can show flickering in the image when the frame rate is not synchronized
with the mains power frequency.
Make sure the selected sensor mode frame rate is in line with the mains power frequency:
–
50 Hz: 25 fps
–
60 Hz: 30 fps
Select the preferred mode based on the scene requirements:
–
HDR: Optimized for High Dynamic Range based on multi-exposure
