en
Childproof lock
12
10 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
10.1 Activating the childproof lock
Requirement:
The appliance is switched off.
▶
Press and hold for approx. four seconds.
a
The control panel is locked.
a
appears in the display.
10.2 Deactivating the childproof lock
▶
Press and hold for approx. 4 seconds.
a
The control panel is unlocked.
11 Basic settings
You can configure the basic settings for your appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Selection
Description
Button tone
= off
= on
1
Switching the button tones on or off
Note:
You cannot switch off the button tone for
and
.
Demo mode
= off
1
= on
The appliance is switched off. You can use the buttons
and the display. The buttons have no function, meaning
that no power arises for the microwave, for example.
Dealers predominantly use the demo mode.
While the demo mode is activated, the display shows .
1
Factory setting (may vary according to model)
11.2 Changing basic settings
Requirement:
The appliance is switched off.
1.
Press and hold
and for a few seconds.
a
The display shows for the first basic setting.
2.
To edit the basic setting, press
.
a
The selected setting lights up in the display.
3.
Use the rotary selector to set the required selection.
4.
To accept the basic setting, press
.
5.
To exit the basic setting, press .
6.
Use the rotary selector to change to the basic set-
ting .
7.
To edit the basic setting, press
.
a
The selected setting lights up in the display.
8.
Use the rotary selector to set the required selection.
9.
To accept the basic setting, press
.
10.
To exit the basic setting, press .
11.
To exit the basic settings menu, press again.
Tip:
You can change this setting again at any time.
11.3 Changing the signal duration
When your appliance is switched off, you hear an aud-
ible signal. You can change the duration of the signal.
▶
Press and hold
for approx. six seconds.
a
The signal duration switches between short and
long.
a
The appliance applies the signal duration and dis-
plays the time.
11.4 Changing the time
You can change the time on the clock at any time.
1.
Press .
2.
Set the time using the rotary selector.
3.
Press to confirm the time.
11.5 Hiding the clock in standby
You can hide the clock when the appliance is in
standby mode.
1.
Press .
2.
Press .
Note:
Press to display the clock again.
