Bosch EasyComfort 6 Series, Руководство по эксплуатации

Страница: 21 / 166

21
B O S C H
ENGLISH
* Model dependent
Trouble shooting
Problem Possible causes Solution
The iron begins to
smoke when
switched on.
1. During irst use: certain
components on the appliance
have been lightly greased at
the factory and may produce a
small amount of smoke when
initially heated.
1. This is completely normal and
will stop after a short while.
The iron does not
produce any
steam.
1. During irst use, water has not
illed the hose (4) completely.
2. The “Calc'nClean” indicator
light (1) will lash. The
descaling process has not
been completed.
1. Press and hold the steam
release button (13) until steam
comes out.
2. Perform a cleaning cycle (see
the “Descaling process"
section).
Dirt comes out
through the
soleplate.
1. There is a build-up of lime
scale or minerals in the iron.
2. Chemical products or additives
have been used.
1. Carry out a cleaning cycle (see
the “Descaling process"
section).
2. Never add products to the
water (see the “Filling the water
tank” section).
Clean the soleplate with a
damp cloth.
The “Calc'nClean”
indicator light (1)
does not turn off.
1. The iron descaling process
has been stopped before
being completed.
1. Restart and complete the iron
descaling process.
The appliance
makes a pumping
sound.
1. Water is being pumped into
the iron.
2. The water tank is empty.
1. This is normal.
2. Fill the water tank.
The iron produces
little steam.
1. The iron has been switched on
recently.
1. It is normal, the iron produces
steam gradually until it is
stabilized.
If the above tips do not solve the problem, get in touch with our customer service.
You can download this manual from the Bosch local homepages.