en
Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching on intensive mode 1
Switching on intensive mode 2
Switching the fan run-on on or off
Switching automatic mode on or off
Resetting the filter saturation indicator
Home Connect
Switching the lighting on or off
Setting the brightness
6 Basic operation
6.1 Switching on the appliance
▶
Press .
a
The appliance starts at fan setting 2.
6.2 Switching off the appliance
▶
Press .
6.3 Selecting a fan setting
▶
Press , or .
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1.
Press
to switch on the intensive setting 1.
2.
In order to switch on the intensive setting 2, press
.
a
After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
▶
Press , or .
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
▶
Press
a
The fan run-on starts at fan setting 1.
a
The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching off the fan run-on
▶
Press
6.8 Switching on automatic mode
1
The optimum fan setting is set automatically using a
sensor.
▶
Press .
6.9 Switching off automatic mode
1
▶
Press , or .
a
The ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
a
Automatic mode runs for a maximum of four hours.
6.10 Sensor control
1
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡
Factory setting: 3
¡
Lowest setting: 1
¡
Highest setting: 5
1
Depending on the appliance specifications
