134
en | Replacing Failed Memory in the E2600 Controller Canister
E2600 DSA E-Series iSCSI Disk Arrays
- | V2 | 2012.09
Installation Manual
Bosch Security Systems
Figure 18.5
Controller Cover and Internal Parts
13. Remove the top cover from the controller canister.
14. Perform one of these actions:
–
You are replacing a failed cache memory DIMM
–
Go to
Section 18.2 Replacing a Cache Memory DIMM, page 135
–
You are replacing a failed cache backup memory device
Go to
Section 18.3 Replacing a Cache Backup Memory Device, page 136
18.1.1
Cache Memory DIMM Fault Code / Display Error Code Definitions
Table 18.1
Cache Memory DIMM Fault Code
Code
Description
DE
A diagnostic error has occurred.
L2
A lock-down code for persistent memory errors appears.
Dash
Category delimiter. All segments are off except for the middle segments, and
the Diagnostics LED is on.
CF
A component failure has occurred.
Cx
Cache memory DIMM (x is the location of the cache memory slot).
Blank-
An end-of-sequence delimiter appears. All segments are off, and the
Diagnostic LED is off.
Содержание DSA E Series
Страница 1: ...E2600 DSA E Series iSCSI Disk Arrays en Installation Manual ...
Страница 2: ......
Страница 149: ......