Bosch DOK-MOTOR-MCL Series, Руководство по планированию проекта

Страница: 85 / 196

8 Connection technique
8.1 Power connection
8.1.1 Connection cable on primary part
Primary parts of MCL motors are fitted with a flexible and totally shielded con‐
nection cable. This 1100 mm long connection cable is connected with the pri‐
mary part.
① Primary part MCP
② Connection cable power
① Connection cable (Hall unit - optional bei MCP020 ... 070; see
Fig.8-8 )
① Wires with wire end ferrules (wire designation acc. to DIN EN
60445)
Fig. 8-1: Design of connection cable (power) on the primary part MCP
Wire designation on power connection cable
Designation
MCP015 1) MCP020 ... 070 1)
U BN (YE) 1 BN (YE)
V BK (GN) 2 BK (GN)
W GY (BU) 3 GY (BU)
PE not applicable GNYE
TP(+) not applicable 7 PK
TP(-) not applicable 8 WH (GY)
Shield Shield Shield
1) Colors in brackets can be transitionally available.
Tab. 8-1: Wire designation (power) on MCP primary parts
Exceeding of voltage limits!
DANGER
Prepare a suitable connection with a protective switch via the primary part
carrier when using AC voltage > 50 V or DC > 120 V (DIN IEC 60364-4-41).
DOK-MOTOR*-MCL********-PR05-EN-P Bosch Rexroth AG 83/193
Rexroth IndraDyn L Ironless Linear Motors MCL
Connection technique