HDD info
Figure 7.11: HDD info
This top of the screen provides information on the current status of each HDD (O means
current HDD is normal; X means there is a disk error; – means there is no HDD; ? means disk
is damaged). After a system start, the system will first check for any HDD error.
Notice!
If an error (X) is shown
Check the hard disk time and system time are the same (if necessary, modify system time in
Setting > General, and reboot the system). If the error persists, check the SMART
information (see below) and, if necessary, format the HDD and reboot the system.
Earliest recording – shows the date and time of the oldest recording still available on HDD.
Total protected size – shows the total size of all protected recordings stored on the HDD (you
can protect a recording using the Protect Playback function available on the Search/Play
screen).
The bottom half of the screen lists each HDD type, total size, and the free space remaining on
the disk. Double-click on any item for more (Smart) information – see following example.
7.4.1
112 en | Operating instructions
DIVAR AN 3000 / DIVAR AN 5000
2015.10 | v2.3 | AM18-Q0669
Operations Manual
Bosch Security Systems
Содержание DIVAR AN 5000
Страница 1: ...DIVAR AN 3000 DIVAR AN 5000 Digital Video Recorder en Operations Manual ...
Страница 2: ......
Страница 168: ......
Страница 169: ......