26
en | System setup
DIVAR IP all-in-one 7000 (2U)
2019.08 | V1 | DOC
Installation manual
Bosch Security Systems B.V.
Notice!
Formatting a hard drive deletes all existing data on the hard drive.
See also
–
5.5
Starting the application
The application provides a simple to install and intuitive to use solution for network
surveillance systems.
To start the application:
1.
Connect the unit and the cameras to the network.
2.
Turn on the unit.
The Windows Storage Server 2016 setup process starts.
3.
Select the appropriate language for the installation, then click
Next
.
4.
In the
Country or region
,
Time and currency
and
Keyboard layout
lists, click the
appropriate item, then click
Next
.
The Microsoft Software License Terms and the EULA (End User License Agreement) are
displayed.
5.
Accept the license terms, then click
Start
. Windows restarts.
6.
After restart is finished, press CTR+ALT+DELETE. The Windows logon page is displayed.
7.
Enter the default password
WSS4Bosch
.
8.
After entering the password, a message is displayed that you must change the password
before logging on the first time. To confirm, click
OK
.
9.
Change the password.
A series of scripts perform important setup tasks. This can take several minutes. Do not
turn off the computer.
The BVMS default screen is displayed.
You can now decide in which mode you want to operate the system:
–
Operating as full video recording and management system, page 27
–
Operating as pure video recording system, page 27
–
Operating as iSCSI storage expansion, page 27
Notice!
In case of password loss a system recovery must be performed as described in the
installation manual. The configuration must be done from scratch or must be imported.
Notice!
We strongly recommend not changing any operating system settings. Changing operating
system settings can result in malfunctioning of the system.
Notice!
To perform administrative tasks, you have to log on to the administrator account.
