Bosch DIP-7280-00N Скачать руководство пользователя | Manualshive

Страница: 24 / 52

background image

24

en | System setup

DIVAR IP all-in-one 7000 (2U)

2019.08 | V1 | DOC

Installation manual

Bosch Security Systems B.V.

5

System setup

The DIVAR

IP

all-in-one

7000 systems are based on Windows Storage Server 2016 operating

system. The Windows Storage Server 2016 operating system provides a user interface for
initial server configuration, unified storage appliance management, simplified setup and
storage management, and support for Microsoft iSCSI Software Target.
It is specially tuned to provide optimal performance for network-attached storage. The
Windows Storage Server 2016 operating system provides significant enhancements in storage
management scenarios, as well as integration of storage appliance management components
and functionality.

Notice!

This chapter is valid for DIVAR

IP

all-in-one

7000 models that come with pre-installed hard

drives.
The operating system of empty units loaded with third party hard drives will start normally,
but the added hard drives must be configured with the RAID utility prior to initial software
setup.

See also

–

RAID setup, page 32

5.1

Default settings

DIVAR

IP systems are shipped with a pre-installed Configuration Wizard from factory.

All DIVAR

IP systems are preconfigured with a default IP address and with default iSCSI

settings:
–

IP Address: automatically assigned by DHCP (fallback IP address: 192.168.0.200).

–

Subnet mask: automatically assigned by DHCP (fallback subnet mask: 255.255.255.0).

Default user settings for administrator account

–

User: BVRAdmin

–

Password: WSS4Bosch

5.2

Prerequisites

Observe the following:
–

DIVAR

IP needs to have an active network link during installation. Make sure that the

network switch you are connecting to is powered on.

–

The default IP address must not be occupied by any other device in the network. Make
sure that the default IP addresses of existing DIVAR

IP systems in the network are

changed before adding another DIVAR

IP.

5.3

Operating modes

The DIVAR

IP system can operate in three different modes:

–

Full video recording and management system, utilizing the BVMS and VRM core
components and services: This mode allows for advanced video management features
such as event and alarm handling.

–

Pure video recording system, utilizing the VRM core components and services.

–

iSCSI storage expansion for a BVMS or VRM system, which runs on a different hardware.

Notice!

Recorded video streams need to be configured in a way that the maximum bandwidth of the
system (BVMS/VRM base system plus iSCSI storage expansions) is not exceeded.

«
...
22
23
24
25
26
...
»

Содержание DIP-7280-00N





















































Отзывы:

Нет отзывов

Похожие инструкции для DIP-7280-00N

Бренд: M-Audio Страницы: 10

Бренд: Paradyne Страницы: 1

Бренд: IDT Страницы: 281

DMX-Universal-Demux

Бренд: DMX4ALL Страницы: 17

Бренд: Rockwell Automation Страницы: 108

AT-9424Ts/XP AC

Бренд: Allied Telesis Страницы: 3

LoadMaster 1500

Бренд: KEMP Technologies Страницы: 71

Бренд: iBall Baton Страницы: 9

RUGGEDMAX WIN7000

Бренд: RuggedCom Страницы: 42

IBOX-BAC Series

Бренд: IntesisBox Страницы: 2

WRT54GR - Wireless-G Broadband Router

Бренд: Linksys Страницы: 81

Бренд: Maipu Страницы: 80

Бренд: Netis Страницы: 16

Бренд: V-Count Страницы: 2

DataFire GO! PRO

Бренд: Digi Страницы: 20

AdvancedTCA AT8901M

Бренд: Kontron Страницы: 76

Бренд: Air Live Страницы: 2

GigaSpire BLAST u4hm

Бренд: Calix Страницы: 45

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды