Bosch DICENTIS, Руководство по настройке, Страница: 83 / 134

DICENTIS Meeting application | en 83
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
– Configure which OMI outputs are connected to which DICENTIS OMNEO inputs on
the Floor and language routing page.
2. Use the DCN-IDESK to:
– Configure which language is on which DCN Next Generation channel. For more
information on how to do this, refer to the ‘DCN Next Generation installation
manual’.
3. Use the push/rotate button on the OMNEO Media Interface (PRS-4OMI4) to:
– Configure which OMNEO input is used to receive the Floor audio from DICENTIS. To do
this:
–
select the OMNEO Input number.
– configure the DCN Next Generation channel for Floor (00 is the Floor channel for
DCN Next Generation).
– Configure which OMNEO outputs are used to send the interpreted languages to
DICENTIS. To do this:
–
select the OMNEO Output number.
– configure the DCN Next Generation channel (01 - 31), which is forwarded to
DICENTIS.
i
Notice!
To receive the floor from DCN Next Generation, connect an XLR cable between the DCN-
CCU2 output 2 and the DCNM-APS2 input 2.
Sending languages to DCN Next Generation
1. In the Meeting application :
– configure the OMNEO channel for delivering the Floor language and interpretations
to the DCN Next Generation system.
2. Use the push/rotate button on the OMNEO Media Interface (PRS-4OMI4) to:
– Configure which OMNEO input is used to receive the Floor audio from DICENTIS. To do
this:
–
select the OMNEO Input number.
– configure the DCN Next Generation channel for Floor (00 is the Floor channel for
DCN Next Generation).
– Configure which OMNEO inputs are used to receive the interpreted languages to
DICENTIS. To do this:
–
select the OMNEO Input number.
– configure the DCN Next Generation channel (01 - 31), which is received from
DICENTIS.