Bosch DICENTIS, Руководство по настройке, Страница: 64 / 134

64 en | Meeting application DICENTIS
2021.06 | V3.7 |
Configuration manual
Bosch Security Systems B.V.
– Participant’s device GUI language: Use the drop-down list to select the required GUI
language of all devices with a graphical user interface. This setting is overruled by the GUI
language setting in the
Persons page.
– ScreenLine definition: The screen line is defined here. To activate the screen line, click
the Apply button. The information entered in the general fields of a Person or User (i.e.:
FirstName, LastName, MiddleName, Title, Region, Country) can be inserted here by using
the $‑sign directly in front of the description.
Screenline definition example : $FirstName $LastName $MiddleName $Title $Region
$Country
Optionally the number of characters of an item shown can be limited from 1 to 99 by adding
the number behind the field between parentheses. Numbers used below 1 or above 99 are
parsed as normal text. The screen line entry must contain at least one of the above items. If
the entry is not accepted, it is enclosed within a red box.
–
Meeting notes location: The location of the meeting notes is defined here. By default, the
meeting notes are saved on the Server PC in: \ProgramData\Bosch\DICENTIS .
Use the Browse button to select another location, if required. For more information on
the meeting notes, refer to Post-meeting tools.
Note: The default location for the meeting notes is only displayed if the DCNM‑LMPM
license is activated.
– Power off devices when system is idle for: This function is intended to automatically
turn off the participant devices and interpreter desks when the system is idle for a certain
amount of time to save energy and increase the lifetime of the equipment.
Note: The system is regarded as being in idle state when the speakers list (or queue) is empty
and when no microphone of a DICENTIS interpreter desk is active. This mode is disabled when
microphone mode
Voice is used.
The system automatically turns off after 2 hours of inactivity, and this option can be
configured from
Disabled to 16 hours .
Note: This option turns off the system by disabling the 48 V on the high power outputs of the
DICENTIS (Audio processor and) Powering switch.
i
Notice!
Discussion devices and interpreter desks connected to PoE switches will not power off.
The participant devices and interpreter desks can be powered on using the available methods:
– The power on functionality on the Meeting Application.
– The power on functionality on the Synoptic Control.
– The power on functionality on the multimedia device connected to the low power/
always powered DICENTIS output of the DCNM-APS2/DCNM-PS2 (or DCNM-APS/
DCNM-PS).
– Making a physical power on button based on the circuit-diagram described in
chapter 5.5.5 of the DICENTIS Installation manual.
This function is enabled by default on new systems and after upgrading the system software
to the 3.2 version.