Bosch DICENTIS, Руководство по настройке

Страница: 55 / 134

DICENTIS Meeting application | en 55
Bosch Security Systems B.V.
Configuration manual
2021.06 | V3.7 |
– Verify participant at seat by :
- PIN code : Participants can use a PIN code to authenticate themselves (multimedia
device and DCNM-DE only).
- Password : Participants use their password to authenticate themselves (multimedia
device only).
- External system : Participants are authenticated by means of an external system (all
DICENTIS devices).
Quorum
– Quorum (only available when the license DCNM‑LSID is present in the system) : Quorum
is used to validate if enough participants are present to continue the meeting or voting
round. When enabled, it will be automatically calculated if the expression results in a true
or false. The expression information is available on the Meeting application, Synoptic
control, .NET API and Conference protocol.
– Use vote weight: When selected, the configured vote weight will be used for the
automatic quorum calculation (e.g. if a participant has a vote weight of 5, his presence
will be calculated as the presence of 5 participants).
–
Quorum expression : Use the buttons in the table to the right to insert the variables
into the Quorum expression, or type the variables in the expression fields.
– Test result : The test values can be used to validate the expression. The test result
box colors turns green when the expression is true; red when the expression is false;
and orange when the expression is invalid.
Example : if at least 2/3 of the participants with voting rights need to be present to
reach the quorum, then the Quorum expression will be:
PresentVoteRights / VoteRights ≥ 2/3
Note : the Quorum is displayed in the Meeting application and Synoptic control as a bar graph.
For correct display, the value should be between 0 and 1 and > or ≥ must be used. If these
prerequisites are not met, then a bar graph cannot be displayed and only the true or false
indication will be displayed, based on the expression.
Refer to
– Persons, page 47
– Participants, page 55
– Uploading and accessing files, page 117
5.3.5 Participants
Persons can be added to and removed from a meeting by using the Add and Remove buttons
in the Participants pane. As soon as a Person is added to a Meeting that person becomes a
Participant .
Persons are added to the system as described in Persons, page 47.
Button Description
Add Used to add Persons to a meeting.
Remove Removes the selected participant from the
list.
Tab. 5.1: Button function
– Discuss : When selected, the participant is allowed to discuss.