manualshive.com logo in svg

Bosch DICENTIS, Руководство по настройке, Страница: 36 / 134

Поделиться
Скачать
Bosch DICENTIS Скачать руководство пользователя страница 36

36

en | Software installation

DICENTIS

2021.06 | V3.7 |

Configuration manual

Bosch Security Systems B.V.

Click 

Create root certificate

 to return to the 

Manage certificates

 screen and the Root

certificate details will be entered automatically.

Server certificate

–

Server certificate: 

enter the name of the new Server certificate.

–

Path:

 select the folder where the new Server certificate will be saved.

–

Server certificate password: 

enter a secure password for the new Server certificate.

–

DNS names

: enter all the DNS names of the DICENTIS Server.

–

IP addresses

: enter all the IP addresses of the DICENTIS Server.

i

Notice!

You need to create a new Server certificate when the hostname or the IP address of the
server changes. You can use the same Root certificate, so the clients do not need to install a
new Root certificate.

Click 

Create and install 

to create and install the new Server certificate and make the Root

certificate available for download at the Synoptic browser and install it.
Click 

Create

 to create the Server certificate. You can then install it at a later moment in time.

Hint:

 If you have multiple DICENTIS servers at your site to which clients need to connect,

create the Root certificate on 1 server and use it on the other servers to create the server
certificate. This way, the clients only need to install 1 Root certificate to access all the
DICENTIS servers.

Refer to 

Creating certificates using the command line tool, page 124 for more information.

Содержание DICENTIS







































































































































Отзывы:

Нет отзывов