manualshive.com logo in svg

Bosch DICENTIS, Руководство по настройке, Страница: 107 / 134

Поделиться
Скачать
Bosch DICENTIS Скачать руководство пользователя страница 107

DICENTIS

System server | en

107

Bosch Security Systems B.V.

Configuration manual

2021.06 | V3.7 |

i

Notice!

User data can be present in the database, the voting and meeting notes and the participant
images. Please clear all user data of the DICENTIS server when you decommission the
DICENTIS server. Refer to 

Remove unused images, page 124.

12.1

Creating a backup on the server

The Windows Server Backup application is installed and a shortcut is available on the desktop.
This application can be used to create a backup of the system, including configuration and
DICENTIS licenses, after the system is fully configured. This image can then be restored when
problems occur with the configuration of the system or when the storage media drive is
replaced.

To create a backup:

1.

Double click the Windows Server Backup application icon on the desktop to start the
application

2.

Select 

Backup Once...

3.

Select 

Full server

4.

Create your backup on an external media drive (e.g. USB or network drive) with a
capacity of at least 32 GB.

12.2

Restoring the factory image of the server

Restore the factory image of the DICENTIS server to return to the out of the box default state.

i

Notice!

Restoring the factory image will remove all user data on the DICENTIS server.
* Return the license before restoring the factory image so that the license can be activated
afterwards.
* Backup the database and store it on an external device so that you can restore it after
restoring the image.

To restore the factory image:

1.

Connect a keyboard, monitor and mouse to the DICENTIS server

2.

Power up the DICENTIS server and press the F8 key when "Protected by HP Sure Start" is
displayed to enter the Windows Advanced Boot Options mode

3.

Select 

Repair your computer

4.

When 

Choose an Option

 is displayed, select 

Trouble shoot and System Image Recovery

.

5.

Follow the on-screen instructions.

Note

: The factory image is located on the Recovery drive.

Содержание DICENTIS







































































































































Отзывы:

Нет отзывов