manualshive.com logo in svg

Bosch DICENTIS, Руководство по настройке, Страница: 10 / 134

Поделиться
Скачать
Bosch DICENTIS Скачать руководство пользователя страница 10

10

en | About this manual

DICENTIS

2021.06 | V3.7 |

Configuration manual

Bosch Security Systems B.V.

Release date

Documentation version

Reason

–

Sony SDI/IP cameras are supported via Sony
CGI commands.

2017.08

V.2.3

Sections updated: 3.1, 5.4, 6.2.6, 6.3.2, 6.3.11,
6.4.8
General:
–

Option to show or hide waiting queue for
participants added.

–

Navigation buttons are blocked on the
DCNM-MMD and DCNM-MMD2 during a
voting round.

–

Different 100% settings can be defined to
facilitate interpretation of the voting results.

2017.10

V2.4

Sections updated: 6.3.11, 6.4.4, 6.4.9, 12.6,
12.7, 12.8, 12.9, 12.10.
New sections: 6.4.10, 12.11, 12.12.
General:
–

Vote weight can be assigned during a
meeting to vote for absent persons (proxy
voting).

–

Customer logo can be displayed on the
DCNM-DE.

2018.01

V2.5

Sections updated: 4.2, 6.3.5, 6.3.10, 6.4.8, 6.4.9,
6.4.10.
General:
–

Options for hiding cast votes improved.

–

Options for displaying and storing
individual, group and total voting results
improved.

2018.02

V2.6

Sections updated:
6.3.1 Option 

Import persons

 added.

6.3.11 

Store results

 updated.

2018.09

V2.7

Sections updated: 2.2, 3, 3.1, 3.4.1, 3.6, 6.2.4,
6.3.4, 6.3.5, 6.4.7, 6.4.9, 14.2.4, 14.2.5.
Sections removed: subsection Licensing under
section 14.2.
New sections:
–

6.3.12 Prepare interpretation

–

6.4.11 Interpreter seats added

–

9 Configuring an IDESK (directly on the
device)

–

13.18, 13.19, 13.20, 13.21, 13.22 Hints &
Tips

General:
–

Verify using PIN code added.

2018.11

V2.8

Sections updated:

Содержание DICENTIS







































































































































Отзывы:

Нет отзывов