operation
en
11
operation
7 Basic operation
operation
7.1 Switching on the appli-
ance
▶
Press .
a
The appliance starts at fan setting
1.
7.2 Switching off the appli-
ance
▶
Press .
7.3 Choosing the fan setting
▶
Press
or
to set the corres-
ponding fan setting.
7.4 Switching on intensive
mode
You can use the intensive setting if
there is a large build-up of odours
and fumes or vapours.
1.
To activate intensive mode, press
and hold
for 2 seconds.
2.
To confirm the setting, lights up
and
flashes.
Note:
Intensive mode runs for 10
minutes. Once this time has elapsed,
the appliance switches back to the
fan setting that was last selected.
7.5 Switching off intensive
mode
▶
To end intensive mode early, press
.
7.6 Switching on the fan run-
on
The run-on function allows the ex-
tractor hood to continue running for a
few minutes after it has been
switched off. This eliminates any re-
maining cooking smells. The ex-
tractor hood will then switch itself off
automatically.
1.
Press and hold
.
2.
Press the button for the required
fan setting ,
or
.
a
and the button for this fan set-
ting flash.
Notes
¡
The run-on time for all fan settings
is 30 minutes. Once this time has
elapsed, the ventilation system
switches off automatically.
¡
The fan setting can be changed
during the run-on time by pressing
and holding the required power
level.
7.7 Switching off the fan run-
on
▶
Press and hold
.
a
The fan run-on will end before the
remaining run-on time has
elapsed.
7.8 Switching on the lighting
The lighting can be switched on and
off independently of the ventilation
system.
▶
Press .
7.9 Switching off the lighting
▶
Press .
